K E Y / 1 0 1 8.0 — R E A D M E — September 2005

1) If you are upgrading from a Key/101 product release that is 
   prior to 7.1 then it is imperative that you read the README 
   document for the 7.1 and 7.2 release before continuing with 
   this document. The README71 and README72 members are installed
   into the Key/101 macro library when the 8.0 version of the 
   Key/101 product is installed.


2) All service as documented on the Phoenix Software FTP site 
   through release 7.2 has been incorporated into release 8.0 
   of the Key/101 product.


3) New UPGRADE and BACKOUT functions have been added to the 
   batch TMS20$XB program.  These new functions may be used to 
   facilitate a KEY/101 system upgrade.  The FORMULA and DATA 
   files may now be upgraded in place, although we continue to 
   strongly recommend that you back up your production files 
   before any software upgrade. Refer to the installation manual 
   and the distributed sample JCL in members EZUPGRD and EZBKOUT 
   for additional information on these functions.

   ________________________________________________________________


   Fixes for currently supported versions of our products are 
   published on our web site as they become available.  Please 
   select the FTP directory for your product(s) from our support 
   page noted below. We recommend that customers periodically check 
   for new fixes.
   
   Our support page is at: http://www.phoenixsoftware.com/support
                       or: ftp://ftp.phoenixsoftware.com/pub/key101/

Home | About Us | Contact Us | Products | Support | News | International To request detailed product information or talk to a Phoenix Software representative, call 1-310-338-0400, send a fax to 1-310-338-0801, or send an . © Copyright 1997– by Phoenix Software International. All rights reserved. Trademarks and registered trademarks are properties of their respective owners. Please send comments, questions, and/or suggestions to the